Advertisement
9. Install the system battery:
a. With the side of the battery showing the "+" sign facing up, insert the battery into the socket (callout 1).
b. Press the system battery down until it clicks into place (callout 2).
10. Install the secondary riser cage.
11. Install the access panel.
12. Do one of the following:
Orient the server back in tower mode.
Install the server into the rack.
13. Connect all peripheral cables to the server.
14. Connect each power cord to the server.
15. Connect each power cord to the power source.
16. Power up the server.
17. Properly dispose of the old battery.
For more information about proper battery disposal, contact an authorized reseller or an authorized service provider.
Results
Results
HPE ProLiant ML350 Gen11 Server User Guide
173
Advertisement
