HPE ProLiant ML350 Gen11 User Manual page 15

card installation.
2
This slot supports an OCP NIC adapter.
3
This slot supports an OCP NIC adapter or a type-o storage controller.
4
Primary/secondary riser cage supports two riser boards.
Subtopics Subtopics
Display device setup Display device setup
Display device setup Display device setup
This server supports both VGA port and DisplayPort 1.1a. Before connecting a display device to this server, review the information
below.
Whenever possible, use the same display connection type. For example, if your PC or monitor only has a VGA output, connect it to
the server VGA port. Use of any kind of adapter or converter cable or dongle might lead to decreased display quality or a lag over
the connection.
DisplayPort connection: When connecting an HDMI or DVI display to the DisplayPort, use an active type adapter. Passive type
adapter—marked with the DP++ symbol—is not supported.
Display output modes:
If you connect two display devices to the VGA port and DisplayPort, the same image is shown on both devices—screen
mirroring mode.
The embedded video controller in the iLO 6 chipset does not support dual display or screen extension mode. To enable dual
display mode, install a compatible PCIe graphics card that supports this feature in the expansion slot.
Rear panel LEDs Rear panel LEDs
HPE ProLiant ML350 Gen11 Server User Guide 15