HPE ProLiant ML350 Gen11 User Manual page 114

10. Install the access panel
11. Do one of the following:
Orient the server back in tower mode .
Install the server into the rack .
12. Connect all peripheral cables to the server.
13. Connect each power cord to the server.
14. Connect each power cord to the power source.
15. Power up the server.
16. Configure the controller .
Results Results
The installation is complete.
Energy pack options Energy pack options
If there is an unplanned server power outage, the flash-backed write cache (FBWC) feature of HPE storage controllers requires a
centralized backup power source to back up the write cache data in a flash device. This server supports the following power options—
collectively known as energy pack:
HPE Smart Storage Battery
HPE Smart Storage Hybrid Capacitor
One energy pack supports multiple devices. After it is installed, the status of the energy pack appears in HPE iLO. For more
information, see the iLO user guide:
https://www.hpe.com/support/ilo6 https://www.hpe.com/support/ilo6
Subtopics Subtopics
HPE Smart Storage Battery HPE Smart Storage Battery
HPE Smart Storage Hybrid Capacitor HPE Smart Storage Hybrid Capacitor
Installing an energy pack Installing an energy pack
HPE Smart Storage Battery HPE Smart Storage Battery
The HPE Smart Storage Battery supports both HPE SR and MR storage controllers.
A single 96 W battery can support up to 24 devices.
After the battery is installed, it might take up to two hours to charge. Controller features requiring backup power are not re-enabled
until the battery is capable of supporting the backup power.
This server supports the 96 W HPE Smart Storage Battery with the 260 mm cable.
HPE Smart Storage Hybrid Capacitor HPE Smart Storage Hybrid Capacitor
The HPE Smart Storage Hybrid Capacitor supports both HPE SR and MR storage controllers.
The capacitor pack can support up to two devices.
This server supports the HPE Smart Storage Hybrid Capacitor with the 260 mm cable.
HPE ProLiant ML350 Gen11 Server User Guide 114