Advertisement
13. Remove the dust cover from the processor socket:
a. Press and hold the grip tabs on the dust cover (callout 1).
b. Lift the dust cover away from the bolster plate (callout 2).
Retain the cover for future use.
14. Install the processor-heatsink module:
CAUTION:
CAUTION:
To prevent mechanical damage or depositing oil on your hands or other contaminant to the heatsink contact
surface, hold the heatsink only by the edge of its base plate. Do not touch the heatsink fins.
CAUTION:
CAUTION:
To prevent thermal failure or component damage, do not move the heatsink once the bottom of its base plate
touches the top of the processor. Excessive heatsink movement can cause the thermal grease to smear and become
uneven. Voids in the compound can adversely impact the transfer of heat away from the processor.
a. When using a torque wrench to tighten the heatsink screws, set it to 0.9 N-m (8 in-lb) of torque .
b. Note the Front of server
Front of server text on the heatsink label to correctly orient the processor-heatsink module over the bolster plate.
HPE ProLiant ML350 Gen11 Server User Guide
129
Advertisement
