Advertisement
CAUTION: Press and release the UID button. Holding it down at any time for more than five seconds initiates a graceful
CAUTION:
iLO reboot or a hardware iLO reboot. Data loss or NVRAM corruption might occur during a hardware iLO reboot.
Procedure
Procedure
1. Press and release the UID button.
The Server Health Summary screen is displayed on the external monitor. For more information, see the iLO troubleshooting guide:
HPE iLO 6 Troubleshooting Guide from the https://www.hpe.com/support/ilo6
2. Press the UID button again to close the Server Health Summary screen.
Front panel LED power fault codes
Front panel LED power fault codes
The following table provides a list of power fault codes, and the subsystems that are affected. Not all power faults are used by all
servers.
Subsystem
Subsystem
System board
Processor
Memory
Riser board PCIe slots
FlexibleLOM
Storage controller
System board PCIe slots
Power backplane
Storage backplane
Power supply
PCIe expansion cards installed in riser board 11 flashes
Chassis
GPU card
Rear panel components
Rear panel components
https://www.hpe.com/support/ilo6.
LED behavior
LED behavior
1 flash
2 flashes
3 flashes
4 flashes
5 flashes
6 flashes
7 flashes
8 flashes
9 flashes
10 flashes
12 flashes
13 flashes
HPE ProLiant ML350 Gen11 Server User Guide
13
Advertisement
