Fields That Begin With The Letter N - HP 8924C Reference Manual

Chapter 4, Description of Fields

Fields That Begin with the Letter N

Fields That Begin with the Letter N
Network ID
Netwrk Code
Nom Power
310
This field allows entry of the cell site's network identification (NID).
HP-IB Example
"DISP CCON;CDMA:CELL:CONFigure:NID 0"
sets the network identification of the simulated CDMA cell site to 0.
Operating Considerations
The mobile station stores the NID number it receives from the cell site and
compares it with its home NID to determine if it is roaming.
Screens Where Field is Present
CDMA CELL SITE CONFIGURATION
This field is displayed when the field called
TSB-74, or J-STD-008 selected, and the Esc Mode field is set to Off.
This field sets the base station's network code.
HP-IB Syntax
"CDMA:CELL:CONF:BNC 2"
sets the base station's network code to 2.
Operating Considerations
The Test Set sends the base station network code in the IMSI_11_12 field of the
Extended System Parameters Message.
See Also
Protocol field description, on page 344
Screens Where Field is Present
CDMA CELL SITE CONFIGURATION
This field allows entry of the nominal transmit power offset (NOM_PWR).
has IS-95A,
"Protocol" on page 344
S:\hp8924c\REFGUIDE\MANUAL\fields.chp