HP 8924C Reference Manual page 361

Chapter 4, Description of Fields
Fields That Begin with the Letter R
RF Chan Std
This field is displayed when Chan is selected in the RF Display field on the
CONFIGURE screen.
Use the RF channel standard field to select the channel standard for the radio-
under-test. The RF Generator's and the RF Analyzer's frequencies are
automatically set to correspond to the channel number entered in the
RF Channel
field.
Some of the RF Chan Std choices require that the Test Set is configured to operate
with a specific HP 83236 model ( ). The choices displayed will
table 16 on page 362
be limited to the RF channel standard's your hardware is capable of providing. If
you do not know if you HP 83236B is equipped with Option 007, one way to find
out is to query the Test Set using the HP-IB Common Command, *IDN? (refer to
the HP-IB Quick Reference Guide for a detailed description of this command). If
you have Option 007, the word "WIDEBAND" will be included in the string
returned by the Test Set.
HP-IB Example
"DISP CCNT;CONF:RFCS'USER-DEF'
selects a user-defined RF Channel Standard, The base frequency, chan-
nel spacing, and offset between generator and analyzer frequencies
are settable on the Configure screen when USER-DEF is
selected. "
Operating Considerations
For the NAMPS standards, a third letter is added indicating which frequency band
is used: upper, middle, or lower. For example, when testing a mobile station using
the lower band, choose .
MSL NAMPS
The selection is used to define your own channel assignments. When
USER-DEF
is selected, you enter the , , and
USER-DEF Base Freq Chan Space
settings, found on the Configure screen.
(Gen)-(Anl)
See Also
Base Freq (User Defined) field description, on page 182
Chan Space (User Defined) field description, on page 203
Screens Where Field is Present
CDMA CALL CONTROL
CONFIGURE
361
S:\hp8924c\REFGUIDE\MANUAL\fields.chp