HP 8924C Reference Manual page 259

External Disk Specification
External Reference
See Also
T_Add field description, on page 417
Drop Intcpt field description, on page 237
Soft Slope field description, on page 396
Softer Handoff field description, on page 397
Screens Where Field is Present
CDMA MOBILE REPORTED PILOT STRENGTH
This field is used when storing and loading procedures on an external disk.
Operating Considerations
The HP-IB path entered in the
by the
Select Procedure Location:
screen when is selected.
Disk
Screens Where Field is Present
TESTS (External Devices)
This field is used to select the reference frequency for the REF INPUT rear-panel
connector. The CDMA Reference section of the Test Set will lock to this
frequency, and all CDMA frame clocks will be derived from it.
Operating Considerations
The 10 MHz OVEN OUT is connected to the REF INPUT rear-panel connector
when the Test Set is shipped from the factory.
If the entry in this field does not match the frequency of the reference frequency
on the REF INPUT connector, the message "Reference unlocked, check reference
connection and frequency" will be displayed.
See Also
"REF INPUT" on page 81
"10 MHz OVEN OUT" on page 85
Screens Where Field is Present
CONFIGURE
S:\hp8924c\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields That Begin with the Letter E
External Disk Specification
field on the TESTS (Main Menu)
field is used
259