HP 8924C Reference Manual page 408

Chapter 4, Description of Fields
Fields That Begin with the Letter S
SSD Update (annunciator)
Status
NOTE: If no values are displayed in the CDMA Mobile Reporting table, the query example shown
above will return only the line feed character.
408
When lit, this annunciator indicates that an SSD Update is in progress. A
successful completion of SSD Update results in a
Authentication Data Table (no authentication parameters are displayed from SSD
Update).
See Also
Call Status field description, on page 189
SSD Update field description, on page 407
Screens Where Field is Present
CDMA AUTHENTICATION
This column in the CDMA Mobile Reporting table lists the received pilots'status.
• Active - pilot is a member of the Active Set
• Candidate - pilot is a member of the Candidate Set
• To Drop - pilot's signal strength has dropped below T_Drop
• To Add - pilot's signal strength has exceeded T_dropped below T_Drop
All numbers displayed in the CDMA Mobile Reporting table reflect the last pilot
strength message received from a mobile station. A Pilot Strength Message is sent
from the mobile station when a Softer Handoff is executed, ended, or when the
mobile station detects a change in pilot levels that affects the assignment of pilots
to the mobile station's Active, Candidate, or Neighbor sets.
The CDMA Mobile Reporting table can be cleared by selecting the
field.
(Clear)
HP-IB Example
"DISP CMOB;CDMA:MOB:PIL:STR?"
queries the results displayed in the CDMA Mobile Reporting table.
The value returned by the Test Set includes Status, PN Offset, Strength, and Keep
for each pilot currently being tracked by the mobile station. These values are sent
as a comma-separated list of IEEE floating point numbers, 16 characters each,
ending with a line feed character.
indication in the
Passed
MS Report
S:\hp8924c\REFGUIDE\MANUAL\fields.chp