Keys That Begin with the Letter H
HOLD
Press and release the SHIFT key, then the MEAS RESET key. This stops all
measurements. Selecting HOLD again resumes measurements.
The HOLD key is used to hold/resume all active measurements. There is no
equivalent HP-IB command for the HOLD key. However, the functionality of the
HOLD key can be implemented remotely by using Single Triggering of
measurements.
HP-IB Example
No equivalent HP-IB command
See Also
"Measurement Triggering Process"
HP 8924C User's Guide
S:\hp8924c\REFGUIDE\MANUAL\keys.chp
Chapter 1, Description of Keys
Keys That Begin with the Letter H
in the Operating Overview chapter of the
29