Fields That Begin With The Letter F - HP 8924C Reference Manual

Fields That Begin with the Letter F

FER
This field displays the current frame error rate (FER) measured by the Test Set. A
Service Option 2 (mobile station data loopback) call must be connected before
running an FER test.
A measurement result will be displayed at the end of a test if Display Interim
Results is . (The
No Passed
when a test is done.) Measurement results will be displayed continuously, and
queries will be returned based on interim results if Display Interim Results is
HP-IB Example
"DISP CRXT;MEASure:CDManalyzer:FERasure?"
queries the currently displayed FER measurement result.
Operating Considerations
To measure FER, the mobile station must be on a traffic channel and looping data
back. The and
Connected
station is looping data back.
The CDMA Status Register provides status bits for the Passed, Failed, and Max
Frames Test Status indicators.
See Also
Meas Cntl field description, on page 292
Screens Where Field is Present
CDMA CELLULAR MOBILE RECEIVER TEST
S:\hp8924c\REFGUIDE\MANUAL\fields.chp
Fields That Begin with the Letter F
, , or
Failed Max Frames
annunciators are lit when the mobile
Svc Opt 2
Chapter 4, Description of Fields
annunciator will light
Yes
.
261