HP 8924C Reference Manual page 39

To Detect If a Measurement Limit Has Been Exceeded.
:HLIMit:EXCeeded? and :LLIMit:EXCeeded? commands to detect if a
measurement limit has been exceeded. The returned value is either: 0 (NO) or 1
(YES).
Syntax
:HLIMit:EXCeeded?
:LLIMit:EXCeeded?
Example
OUTPUT 714;"MEAS:AFR:FM:HLIM:EXC?"
ENTER 714;Hi_limit_exced ! 1= YES, 0 = NO
OUTPUT 714;"MEAS:AFR:FM:LLIM:EXC?"
ENTER 714;Lo_limit_exced ! 1= YES, 0 = NO
This determines if the high or low measurement limits for the AF Analyzer FM de-
viation measurement have been exceeded.
To Reset Measurement Limit Detection.
:LLIMit:RESet commands to reset measurement limit detection. Once a high or
low measurement limit has been exceeded (:HLIMit:EXCeeded? returns a 1 or
:LLIMit:EXCeeded? returns a 1), measurement limit detection is disabled until
reset by the :RESet command.
Syntax
:HLIMit:RESet
:LLIMit:RESet
Example
OUTPUT 714;"MEAS:AFR:FM:HLIM:RES"
OUTPUT 714;"MEAS:AFR:FM:LLIM:RES"
This resets high and low measurement limit detection for the AF Analyzer FM de-
viation measurement.
See Also
"Setting Measurement Limits"
8924C User's Guide.
S:\hp8924c\REFGUIDE\MANUAL\keys.chp
Chapter 1, Description of Keys
Keys That Begin with the Letter L
Use the :HLIMit:RESet and
in the Operating Overview chapter of the HP
Use the
39