HP 8924C Reference Manual page 80

Chapter 2, Description of Connectors
Connectors That Begin with the Letter P
POWER DET
PROTOCOL DIAG
80
The POWER DET input routes a dc-coupled signal from the average power
detector on the HP 83236 PCS Interface to the DSP Analyzer in the Test Set. This
signal, which is multiplexed with other power measurements, cannot be selected
by the user.
Operating Considerations
• SMA
• If a frequency translator is connected to the Test Set, the POWER DET input must be
connected to the POWER DET output from the frequency translator to make average
power measurements.
See Also
TX Power field description, on page 437
The protocol logging, cell site 1, RS-232 port is not implemented at this time.
Operating Considerations
• 9-pin sub-miniature D
S:\hp8924c\REFGUIDE\MANUAL\connectr.chp