HP 8924C Reference Manual page 236

Chapter 4, Description of Fields
Fields That Begin with the Letter D
Distn
236
When this field is set to
signal tone.
This field is a one-of-many field used to select the type of measurement to be
made by the Audio Frequency Analyzer on the audio signal being measured. See
"Measure" in the HP-IB Command Syntax chapter of the HP 8924C Condensed
Programming Reference Guide for programming command syntax.
Selecting this field displays the following measurement choices:
SINAD
Distn (Distortion)
SNR (Signal to Noise Ratio)
AF Frequency
DC Level
Current (DC only)
Operating Considerations
This is a priority control field. Accessing the RX TEST or TX TEST screen
overrides any changes made to this field in other screens.
For more information about SNR operation, see the
.
395
Screens Where Field is Present
AF ANALYZER
ANALOG MEAS
DUPLEX TEST
RX TEST
TX TEST
RF GENERATOR
RF ANALYZER
it displays the percent of distortion for a 1 kHz
Distn
SNR field description, on page
S:\hp8924c\REFGUIDE\MANUAL\fields.chp