HP 8924C Reference Manual page 445

Vert/div
Vert Offset
Vertical sensitivity sets the vertical amplitude per division.
Operating Considerations
The value for this field is selected from a list of choices.
Depending on the AF Analyzer's
be in Volts, kHz, or Percent (AM). For example; if the
, the amplitude is displayed in kHz/div.
FM Demod
Screens Where Field is Present
OSCILLOSCOPE
Vertical offset moves the displayed signal above or below the oscilloscope's fixed
centerline.
Operating Considerations
A centerline is displayed for the signal when an offset is used.
When the vertical offset is
generated by the vertical offset feature, not the center line of the screen.
Screens Where Field is Present
OSCILLOSCOPE
S:\hp8924c\REFGUIDE\MANUAL\fields.chp
Fields That Begin with the Letter V
setting, the units for this field may
AF Anl In
≠
0.00, the marker level is referenced to the center line
Chapter 4, Description of Fields
field is set to
AF Anl In
445