HP 8924C Reference Manual page 38

Chapter 1, Description of Keys
Keys That Begin with the Letter L
NOTE: When querying measurement limits through HP-IB, the Test Set always returns numeric
values in attribute units, regardless of the current display units or HP-IB units settings.
Numeric values are expressed in scientific notation.
Refer to
Overview chapter of the
NOTE: When querying measurement limits through HP-IB, the Test Set always returns numeric
values in attribute units, regardless of the current display units or HP-IB units settings.
Numeric values are expressed in scientific notation.
Refer to
Overview chapter of the
38
To Query the Display Units for High and Low Measurement Limits.
:HLIMit:DUNits? and :LLIMit:DUNits? commands to query the units-of-measure
used to display the high and low measurement limit values.
Refer to "
To Specify Units-of-Measure for CRT Display"
chapter of the HP 8924C User's Guide for description of display units.
Syntax
:HLIMit:DUNits?
:LLIMit:DUNits?
Example
OUTPUT 714;"MEAS:AFR:FM:HLIM:DUN?"
ENTER 714;Hi_disp_unit$
OUTPUT 714;"MEAS:AFR:FM:LLIM:DUN?"
ENTER 714;Lo_disp_unit$
This queries the high measurement limit display units for the AF Analyzer FM
deviation measurement.
"To Specify Units-of-Measure for HP-IB Data Transfer"
HP 8924C User's Guide.
To Query the High and Low Measurement Limit Settings.
:HLIMit:VALue? and :LLIMit:VALue? commands to query the high and low
measurement limit settings.
Syntax
:HLIMit:VALue?
:LLIMit:VALue?
Example
OUTPUT 714;"MEAS:AFR:FM:HLIM:VAL?"
ENTER 714;High_limit
OUTPUT 714;"MEAS:AFR:FM:LLIM:VAL?"
ENTER 714;Low_limit
This queries the high and low measurement limits for the AF Analyzer FM
deviation measurement.
"To Specify Units-of-Measure for HP-IB Data Transfer"
HP 8924C User's Guide.
Use the
the Operating Overview
in
the Operating
in
Use the
the Operating
in
S:\hp8924c\REFGUIDE\MANUAL\keys.chp