HP 8924C Reference Manual page 25

To Query the Measurement Averaging State.
commands to query the current state of the averaging data function. The returned
value is either: 0 (OFF) or 1 (ON).
Syntax
:AVERage:STAT?
Example
OUTPUT 714;"MEAS:AFR:DISTN:AVER:STAT?"
ENTER 714;State_on_off ! 1 = ON, 0 = OFF
This queries the state of the AVG data function for the AF Analyzer distortion
measurement.
Use the :AVERage:RESet commands to restart the
To Reset Averaging.
averaging algorithm used to calculate an averaged measurement.
Syntax
:AVERage:RESet
Example
OUTPUT 714;"MEAS:AFR:DISTN:AVER:RES"
This resets the AVG Data Function for the AF Analyzer distortion
measurement.
To Set the Number of Averages.
number of averages used by the averaging algorithm.
Syntax
:AVERage:VALue
Example
OUTPUT 714;"MEAS:AFR:DISTN:AVER:VAL 25"
This sets the number of averages to 25 for the AVG data function for the AF
Analyzer distortion measurement.
To Query the Number of Averages.
query the number of averages used by the averaging algorithm.
Syntax
:AVERage:VALue?
Example
OUTPUT 714;"MEAS:AFR:DISTN:AVER:VAL?"
ENTER 714;Num_of_avgs
This queries the number of averages for the AVG data function for the AF Analyzer
distortion measurement.
See Also
"To Use Measurement Averaging"
HP 8924C User's Guide.
S:\hp8924c\REFGUIDE\MANUAL\keys.chp
Chapter 1, Description of Keys
Keys That Begin with the Letter A
Use the :AVERage:STAT?
Use the :AVERage:VALue commands to set the
Use the :AVERage:VALue? commands to
in the Operating Overview chapter of the
25