Chapter 4, Description of Fields
Fields That Begin with the Letter R
Register
356
This field is used to initiate a registration of the mobile station that is connected to
the Test Set. The Test Set must be in the active state (that is, the
annunciator must be lit) before you can attempt to register the mobile station.
The :REGister command is used to control this field.
There is no query form of the :REGister command.
Syntax
:REGister
Example
OUTPUT 714;"CALLP:REG"
Screens Where Field is Present
CALL CONTROL
Active
S:\hp8924c\REFGUIDE\MANUAL\fields.chp