HP 8924C Reference Manual page 240

Chapter 4, Description of Fields
Fields That Begin with the Letter D
DSAT/DST (hex)
240
Screens Where Field is Present
CALL CONTROL
CDMA CALL CONTROL
The
DSAT/DST (hex)
to and the
NAMPS Display
The DSAT/DST field displays the received
station on the reverse voice channel. The received sequence is displayed in
hexadecimal and can be checked against the DSAT value displayed in the DSAT
right-hand DSAT field. Four dashes (----) indicate no carrier is present to
measure. A numeric value would only be displayed when the Test Set's
annunciator is lit (connected state).
Connected
The :DSAT:MEASurement? query command is used to query the contents of the
left-hand subfield.
There is no command form of the :MEASurement? query.
Syntax
:DSAT:MEASurement?
Example
OUTPUT 714;"CALLP:NAMP:DSAT:MEASurement?"
ENTER 714;MEASured_dsat$
Screens Where Field is Present
CALL CONTROL
field is displayed only when the
field is set to
NMeas
DSAT/DST
field is set
System Type
.
sequence from the mobile
S:\hp8924c\REFGUIDE\MANUAL\fields.chp