HP 8924C Reference Manual page 377

Scope To
Sctr A Pwr
Oscilloscope To selects the signal source for the Oscilloscope. This allows you to
bypass certain sections of the AF analyzer's circuitry when viewing and
measuring a signal. It also allows you to select measurement paths that include
additional gain stages, improving the oscilloscope's resolution when measuring
low-level signals.
See Also
"AF Analyzer Block Diagram" on page 91
Screens Where Field is Present
AF ANALYZER
This field provides control of the Sector A forward CDMA channel generator
output level. Forward CDMA channel power is expressed in units of dBm in a
1.23 MHz bandwidth.
HP-IB Example
"CDMA:CELL:ASECtor:STATe ON"
turns on Sector A.
"CDMA:CELL:ASECtor -100 dBm"
sets Sector A's power to
Operating Considerations
Sector A power, Sector B power and AWGN are summed together and output on
the selected output connector. The total power in a 1.23 MHz bandwidth centered
at the RF channel setting is displayed in the
This field is duplicated on the CDMA GENERATOR CONTROL screen.
Screens Where Field is Present
CDMA CALL CONTROL
CDMA GENERATOR CONTROL
CDMA TRANSMITTER POWER RANGE TEST
CDMA MOBILE REPORTING
CDMA CELLULAR MOBILE RECEIVER TEST
CDMA CELLULAR MOBILE TRANSMITTER TEST
S:\hp8924c\REFGUIDE\MANUAL\fields.chp
−
100 dBm.
RF Power
Chapter 4, Description of Fields
Fields That Begin with the Letter S
field.
377