HP 8924C Reference Manual page 209

Connect (annunciator)
NOTE: When the CALL CONTROL screen is displayed and the Call Processing Subsystem is in the
connected state (Connect annunciator is lit), the Test Set constantly monitors the mobile
station's transmitted carrier power. If the power falls below 0.0005 Watts the Test Set will
terminate the call and return to the active state (Active annunciator is lit). The mobile
station's transmitted carrier power is monitored on all Call Processing Subsystem screens
except the ANALOG MEAS screen.
If the Test Set is in the connected state (Connect annunciator is lit) and a change is made to
the Cntl Channel field the connected state will be lost.
When lit, the
Connect
to the Test Set on a voice channel.
The state of the
Connect
Register Group Condition Register bit 5.
See "Call Processing Status Register Group"
the HP 8924C User's Guide for further information.
The annunciator is not programmable.
Connect
Screens Where Field is Present
CALL CONTROL
CALL BIT
CALL DATA
S:\hp8924c\REFGUIDE\MANUAL\fields.chp
annunciator indicates that the mobile station is connected
annunciator is reflected in the Call Processing Status
in the Status Reporting chapter of
Chapter 4, Description of Fields
Fields That Begin with the Letter C
209