Chapter 7, Description of Fields
Fields That Begin with the Letter A
Fields That Begin with the Letter A
Abort Print
Access (annunciator)
Acc Prb Pwr
136
Select this field to interrupt the print in progress.
Screen(s) Where Field is Present
PRINT CONFIGURE
When lit, the
Access
station with command information on the forward voice channel. This is a
transitory state.
The state of the
Access
Register Group Condition Register bit 4.
The Test Set's speaker is turned off when in the access state. This is done to
eliminate any possible audio feedback which may occur if the mobile station's
microphone is open.
Screen(s) Where Field is Present
CALL CONTROL
This power measurement displays mobile station access probe power. This field is
accessed by highlighting the currently displayed power measurement (listed
below) and selecting Acc Prb Pwr from the list of choices.
This measurement must be cross-calibrated just as the Channel Power
measurements. An
Uncal
Probe Power measurement has not been calibrated for the frequency band selected
in the RF Chan Std field. See
Mobile Station Test Set Introduction to Operation.
annunciator indicates the Test Set is signaling the mobile
annunciator is reflected in the Call Processing Status
annunciator will flash below this field when the Access
"Calibration Procedures"
in the "HP 8924E CDMA