HP 8924C Reference Manual page 439

Cdma mobile station test set

Hide thumbs Also See for 8924C:

Table of Contents

This field is displayed on the screens listed below when the PCS Intrfc Control

field on the CONFIGURE screen is set to "On".

The transmitter power measurement field specifies how transmitter power

measurements are made:

Peak can be used to measure AM, FM, and un-modulated (CW) signals.

Sample can be used to measure FM or CW signals with increased measurement speed.

This method can only be used with signals having no amplitude modulation component.

Operating Considerations

If you change this field, zero the power measurement (using the

field) before measuring power.

Screens Where Field is Present

ADJACENT CHANNEL POWER

S:\hp8924c\REFGUIDE\MANUAL\fields.chp

Chapter 4, Description of Fields

Fields That Begin with the Letter T