HP 8924C Reference Manual page 393

SINAD
MS Ack Received (annunciator)
This is the default measurement for this field. Selecting this field displays the
following measurement choices:
SINAD
Distn (Distortion)
SNR (Signal to Noise Ratio)
AF Freq
DC Level
Current (DC only)
Operating Considerations
This is a priority control field. Accessing the RX TEST or TX TEST screen
overrides any changes made to this field in other screens.
For more information about SNR operation, see the
.
395
Screens Where Field is Present
RX TEST
AF ANALYZER
TX TEST
DUPLEX TEST
RF GENERATOR
RF ANALYZER
If the mobile telephone successfully receives the SMS message, it sends an SMS
received acknowledgment to the Test Set. If the Test Set receives the
acknowledgment from the mobile within a 2 second timeout period, this
annunciator is lit. (The
SMS Sent
If the mobile does not receive the acknowledgment within the 2 second timeout
period, the Test Set will beep and the message,
waiting for SMS Ack from mobile
annunciator will turn off in this case also.) If the acknowledgment is received after
the 2 second timeout period, it will be ignored.
See Also
"Call Status" field on page 189
Screens Where Field is Present
CDMA SHORT MESSAGE SERVICE
S:\hp8924c\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields That Begin with the Letter S
SNR field description, on page
annunciator will turn off.)
Time-out occurred while
, will be displayed. (The
SMS Sent
393