HP 8924C Reference Manual page 379

Select Procedure Location
Send Msg
This field is used the select the location of the procedure to load. Procedures can
be loaded from disk, card, ROM, or RAM.
This field is used the select where a new procedure will be saved, or the location
from which a procedure will be deleted. Procedures can be saved to, or deleted
from, disk, card, or RAM.
Operating Considerations
Procedure files contain a subset of the library file. This is where you save all of
your own frequency, parameter, test sequence, specification, and system
configuration information.
To save a file to an external disk drive, you must enter the drive's HP-IB address
into the
External Disk Specification
Devices) screen.
Screens Where Field is Present
TESTS (Save/Delete Procedure)
TESTS (Main Menu)
When is selected, this field sends the message entered in the
Execute
or
Data (ASCII) User Data (Hex)
HP-IB Example
"CDMA:SMS:TERM:SEND"
sends the message currently displayed in the User Data field
Operating Considerations
After has been selected, the
Execute
Test Set waits for an SMS message acknowledgment from the mobile station. See
"MS Ack Received (annunciator)" field on page 302
Screens Where Field is Present
CDMA SHORT MESSAGE SERVICE
S:\hp8924c\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields That Begin with the Letter S
field on the TESTS (External
fields.
annunciator will light while the
SMS Sent
.
User
379