HP 8924C Reference Manual page 307

MS ID
The field determines how the Test Set identifies a mobile station for
MS ID
paging. Depending on the Protocol field choice, some combination of the
following modes are available, with
• Auto - The Test Set will obtain the mobile station's identification through mobile
station registration, either at mobile station power-on or when the Register field is
selected.
• Phone Num -Allows entry of a 10-digit phone number that identifies the mobile
station, overriding any value for phone number that the test set may have obtained
during mobile station power-on registration. The mobile station must be NON-
SLOTTED to use this MS ID mode. This choice is displayed when IS-95 is selected in
the
"Protocol" field on page
• MIN - Allows entry of MIN, a 9-digit hexadecimal string normally derived from the
phone number, overriding any value for MIN that the test set may have obtained during
mobile station power-up registration. The mobile station must be NON-SLOTTED to
use this MS ID mode. This choice is displayed when IS-95 is selected in the
field on page 344.
• IMSI - Allows entry of IMSI, consisting of MCC, MNC, and MSIN. This choice is
displayed when IS-95A, TSB-74, KorPCS, ARIB T53, or J-STD-008 is selected in the
"Protocol" field on page
HP-IB Examples
"DISP CCNT;CDMA:MOBile:MSID 'AUTO'"
selects "automatic" entry of the mobile station's MIN and Phone Number through
registration.
"DISP CCNT;CDMA:MOBile:MSID 'Phone Num'"
enters a mode whereby the Test Set uses the Phone Number number entered by the
user, and ignores phone numbers obtained during registration.
"DISP CCNT;CDMA:MOBile:MSID 'MIN'"
enters a mode whereby the Test Set uses the MIN number entered by the user, and
ignores MIN numbers obtained during registration.
"DISP CCNT;CDMA:MOBile:MIN '56789ABCD'"
enters the mobile station's MIN number.
"DISP CCNT;CDMA:MOBile:PHONe:NUMBer '1509922075'"
enters the mobile station's phone number.
S:\hp8924c\REFGUIDE\MANUAL\fields.chp
Fields That Begin with the Letter M
as the default.
Auto
344.
344.
Chapter 4, Description of Fields
"Protocol"
307