Keys That Begin With The Letter A - HP 8924E User Manual

Keys That Begin with the Letter A

ADRS
ANS
AVG
ASSIGN
Press and release the SHIFT key, then the LOCAL key to display the HP-IB
address of the Test Set. There is no equivalent HP-IB command for the ADRS
key.
See Also
"I/O Configure Screen" on page 129
This key functions only when
Pressing this key answers CDMA-mode mobile-station-originated calls by
removing the ring back tone from the mobile station's audio path and allowing
user conversation or other traffic to be exchanged.
The Test Set will automatically answer calls if
Press and release the SHIFT key, then the INCR x10 key to access the average
function. This enables or disables measurement averaging.
See Also
"To Use Measurement Averaging" on page 48
This key is used to assign the User Keys, K1 through K5, and K1' through K3'.
Press and release the SHIFT key, then the K4 key to select the ASSIGN function.
See Also
"Using USER Keys" on page 59
Chapter 4, Description of Keys
Keys That Begin with the Letter A
is set to
Answer Mode
Answer Mode
.
Manual
is set to
Auto
.
69