Rear/Side - MIMAKI TxF150-75 Operation Manual

Rear/side

Clamp lever (rear)
Interlocks with the clamp lever in
the front.
USB port
USB 2.0 interface.
LAN port
Ethernet interface.
Main power switch
For turning the machine's main power supply on/off.
Leave the main power turned on to prevent ink
clogging.
AC inlet
For connecting the power cable.
Chapter 1 Before Use
Blowing fan
Blows air to dry ink after
printing.
Vacuum fan exhaust port
Exhaust port for the fan that
holds media in place.
Roll holder
Holds roll media when the ends of
the paper core (left and right) are
inserted. Supports 2-inch and 3-
inch paper cores.
1
2
2
2
5
6
1-3