MIMAKI TxF150-75 Operation Manual page 24

Chapter 1 Before Use
Adjust the shape of the ink pack.
4
Remove the seal of the double-sided tape.
5
Secure the ink pack so that it will not
6
become loose.
• When securing the ink pack, be sure to secure it
so that there is no bias within the ink cartridge
case.
Good example
The ink pack is aligned with
the corner of the case
Bad example
The ink pack is
inclined
1-12
The corners of the ink pack
and the case are not aligned
Replace with a new ink IC chip.
7
• Slide to the side to remove.
Good example
Front and back
are reversed
Ink Color
Cyan
Magenta
Yellow
Black
White
Close the case lid.
8
• Push in until the tab clicks.
• Be careful to avoid catching your hands or
fingers.
Bad example
Inserted
incorrectly left-to-
right
Marking
(One blue circle)
(One red circle)
(One yellow circle)
(One black circle)
(One white circle)