Rear Side And Right Side Of The Machine - MIMAKI JV400-LX Series Operation Manual

Rear Side and Right Side of the Machine

Clamp lever (rear)
Interlocks with the clamp lever in the
font of this machine.
Cleaning solution cartridge
Set a dedicated Washings
cartridge (optional).
LANconnector
LAN connector for service maintenance.
The customer shall not use this.
USB 2.0 connector
This is USB2.0 interface connector.
Main power switch
Turns on/off the main power for this machine.
Leave the main power turned on to prevent ink
clogging.
AC inlet
Connect the power cable to the AC inlet.
Names of Parts and Functions
Pre-heater
Preheats the media before printing.
(Located inside the platen)
Roll holders
Putting this into the paper core
(right and left) of a narrow roll
medium (less than 1.6m), hold the
medium. It supports the paper
core of 2 inch and 3 inch.
1
3
4
5
6
1-5