Error Messages - MIMAKI TxF150-75 Operation Manual

Chapter 5 Troubleshooting

Error messages

Respond to error messages as follows.
If the message is displayed again despite the measures you have taken, contact your dealer, or our sales office or call
center.
Message
ERROR 122
CHECK:SDRAM
ERROR 128
HDC FIFO OVER
ERROR 128
HDC FIFO UNDER
ERROR 129
BATTERY EXCHANGE
ERROR 130
HD DATA SEQ
ERROR 146
E-LOG SEQ
ERROR 151
Main PCB V1R2
ERROR 152
Main PCB V2R5
ERROR 153
Main PCB V3R3
ERROR 154
Main PCB V05
ERROR 157
Main PCB VTT
ERROR 16e
Main PCB V3R3B
ERROR 15f
HEAD DRIVE HOT
ERROR 171
NEW HEAD CONNECT
ERROR 186
HDC OVERFLOW
ERROR 186
HDC UNDERFLOW
ERROR 187
HDC SLEW RATE
ERROR 188
HDC MEMORY
5-6
Cause
An SDRAM error occurred.
A head control PCB error occurred.
The machine has detected that the inter-
nal clock battery is depleted.
Head data transfer error.
Event log sequential number error.
An error occurred in the power supply
system of the main PCB.
Printing waveform error detected.
Corrective action
• Temporarily turn off the main power supply,
and then turn it on again.
If the message appears again, contact your
dealer, or our sales office or call center.
• Contact your dealer, or our sales office or
call center.
• Temporarily turn off the main power supply,
and then turn it on again.
If the message appears again, contact your
dealer, or our sales office or call center.