Operating Panel - MIMAKI TxF150-75 Operation Manual

Chapter 1 Before Use

Operating panel

Use the operating panel to specify print settings or operate the machine.
[SEL] key
Switches the selected function.
Function ([FUNC1]–[FUNC3])
keys
Pressed to set various functions,
perform test printing, etc.
JOG keys
Used to move the carriage or media in
local mode and to select setting items.
[END/POWER] key
Cancels the previously entered setting
or returns to the previous level of the
setting menu. Also used to turn the
power on and, when held down, off.
[ENTER] key
Used to move to the next level of the
setting menu or to confirm the setting
value.
• Turning the machine on with the power switch illuminates the [END/POWER] key (near the bottom of the oper-
ating panel) in blue. As long as the main power switch (
ically (to prevent nozzle clogging, for example).
*1: Ink status
Ink status (such as remaining ink level or errors) is indicated by icons.
Icon
• The amount of ink left is indicated in nine levels with these icons.
Ink full
• Displayed when the machine is nearly out of ink. Very little ink is left, so have new ink ready.
• Displayed when ink is depleted or an ink error has occurred. Printing is not possible.
Displayed when the ink has passed its expiration date. Replace with new ink or use up as quickly
as possible. Printing is possible.
1-4
LOCAL
PRE
30° /40°30° /35°40° /50°
MENU
Status indicator lamp
Indicates the machine's status (printing, error, etc).
Lamp state
Off
Lit in light blue
Flashing light
blue
Lit in blue
Flashing red
Lit in red
Approx. 1/8 Approx. 1/4 Approx. 3/8
used used used
Display
Shows the following items:
• Machine status
width:1340mm
PRINT POST
• Width of loaded media
• Heater temperature (current/set tem-
TEST PRINT
perature)
REMOTE
CLEANING
• Ink status
• Functions assigned to [FUNC1]–
[FUNC3]
Machine status
In local mode. No print data received, and no errors.
In remote mode.
Currently printing.
Printing an internally stored pattern, as in test printing.
Print data still remains in the machine.
An error has occurred.
An error (SYSTEM HALT) has occurred.
P.1-3) is on, auto maintenance is performed period-
Details
Approx. 1/2 Approx. 5/8 Approx. 3/4
used used used
*1
*2
Approx. 7/8 Near end
used