Setting Nozzle Checking During Printing; Setting Auto Nozzle Recovery; Setting Judgment Conditions - MIMAKI TxF150-75 Operation Manual

Chapter 3 Settings

Setting nozzle checking during printing

Set to ON to check nozzles when the printer is online and
about to begin printing.
With the screen in local mode, select
1
[MENU] > [NOZZLE CHECK], and then
press the [ENTER] key.
• The nozzle check menu is displayed.
Select [Printing Check] > [ON], and then
2
press the [ENTER] key.
• To disable this nozzle checking, select [OFF].
Select [Check Interval] and press the
3
[ENTER] key.
Select a setting item and press the
4
[ENTER] key.
• LENGTH: Checks nozzles after the machine has
fed the specified length of media.
• FILE: Checks nozzles after the number of files
printed reaches the specified value.
Select a setting value and press the
5
[ENTER] key.
• Setting values vary depending on whether you
have selected [Length] or [File] above.
• LENGTH: 0.1–50 m
• FILE: 1–300 files
Select [Action] > [CLEANING TYPE], and
6
then press the [ENTER] key.
Select the type of cleaning, and then press
7
the [ENTER] key.
• Setting value: OFF / SOFT / NORMAL / HARD
Select [Action] > [RETRY COUNT], and
8
then press the [ENTER] key.
• Setting value: 0–3 times

Setting auto nozzle recovery

Set to perform automatic nozzle recovery if nozzle
clogging is detected.
With the screen in local mode, select
1
[MENU] > [NOZZLE CHECK], and then
press the [ENTER] key.
• The nozzle check menu is displayed.
Select [AUTO NOZZLE RECOVERY] and
2
press the [ENTER] key.
Select a setting value and press the
3
[ENTER] key.
• Setting value: ON / OFF
3-18

Setting judgment conditions

Set the conditions that determine nozzle clogging.
With the screen in local mode, select
1
[MENU] > [NOZZLE CHECK], and then
press the [ENTER] key.
• The nozzle check menu is displayed.
Select [Judgment Condition] and press the
2
[ENTER] key.
Select a color and press the [ENTER] key.
3
Select the number of nozzles that
4
determines the judgment, and then press
the [ENTER] key.