Rear And Right Side View - MIMAKI JV100-160 Operation Manual

Rear and Right Side View

10
9
8
7
6
No. Name
1 Clamp lever (rear)
2 Media sensor
3 Blowing fan
4 Preheater
5 Feeding unit
6 AC inlet
7 Main power supply
switch
8 LAN port
9 USB port
10 Maintenance liquid
cartridge
2
1
Linked to the clamp lever at the front.
Detects whether media is present.
Blows air to dry ink after printing.
Preheats the media before printing to suppress rapid temperature change.
Adjust the temperature setting to suit the type of media used.
the Heater Temperature"(P. 57)
Holds the roll media before printing. Compatible with 2-inch and 3-inch
paper rolls
The inlet at the front (INLET2) is for the heater and the inlet at the rear
(INLET1) is for the machine. Used to connect the power cable (provided).
"Connecting the Power Cable"(P. 30)
The power supplies at the front and rear are for the heater and the machine
respectively. To prevent print defects attributable to the print head (e.g.,
nozzle clogging, deflection), do not turn off the main power supply.
"Turning On the Power"(P. 30)
Used when using the network function.
Connects to PC via a USB interface cable.
Used to automatically feed maintenance liquid to the cap, to drip liquid on to
the wiper to prevent ink solidification, and to prevent ink solidifying inside the
ink discharge channel during maintenance.
21
Chapter 1 Before Using This Product
4
5
Outline
"Media sensor"(P. 24)
"Turning Off the Power"(P. 31)
"Using a LAN Cable"(P. 32)
"Using a USB Cable"(P. 32)
3
"Setting
1