Rear And Right Side View - MIMAKI UJV100-160 Operation Manual

Rear and Right Side View

9
8
7
6
No. Name
1 Clamp lever (rear)
2 Media sensor
3 Ink wipe filter
4 Feed unit
5 Ink IC chip slot
6 AC inlet
7 Main power supply
switch
8 LAN port
9 USB port
2
1
5
Linked to the clamp lever at the front.
Detects whether media is present.
Filter for soaking up ink droplets from special ink bottle caps
Holds the roll media before printing. Compatible with 2-inch and 3-inch
paper rolls
The ink IC chip provided with the Ink bottle is inserted here to register Ink
bottle information. "Replacing Ink"(P. 38)
Used to connect the power cable (provided).
Cable"(P. 30)
Main power supply for the product To prevent print defects attributable to the
print head (e.g., nozzle clogging, deflection), do not turn off the main power
supply. "Turning On the Power"(P. 30)
Power"(P. 31)
Used when using the network function.
Connects to PC via a USB interface cable.
21
Chapter 1 Before Using This Product
4
Summary
"Media sensor"(P. 23)
"Connecting the Power
"Turning Off the
"Using a LAN Cable"(P. 32)
"Using a USB Cable"(P. 32)
3
1