MIMAKI TxF150-75 Operation Manual page 8

Introduction
Precautions in use
Handling of the power cable
• Plug into a polarized electrical outlet.
• Always plug the power cable into an outlet near
the machine, and make sure the power cable can
be easily unplugged.
• Regularly (at least once a year) unplug the cable
and remove any dust on or near the power plug.
Failure to remove dust may result in fire.
• Do not use a voltage other than the indicated
voltage.
• Before plugging in the machine, check the outlet
supply voltage and circuit breaker capacity. Plug
each cable into a power source with an
independent breaker. If you plug more than one
power cable into outlets that share the same
circuit breaker, it may trip the breaker.
Power supply
• Leave the breaker in the ON position.
• Do not turn off the main power switch on the side
of the machine.
Notes on maintenance
• Pay close attention to ventilation and be sure to
wear safety glasses, gloves, and a mask when
handling ink, maintenance liquid, waste ink, or
other solutions used with the machine. Leaking
ink may adhere to the skin or get into the eyes or
mouth.
• Gloves are consumables. After you have worn out
the included gloves, purchase and use
commercially available gloves.
Moving part precautions
• Keep fingers and other body parts away from
hazardous moving parts.
• Do not touch the grit roller when it is rolling.
Failure to observe these instructions may result in
finger injury such as torn skin or fingernails.
• Keep your head and hands away from moving
parts during cutting operation. Failure to observe
these instructions may result in injury such as
your hair becoming caught in the machine.
• Wear suitable clothes. (Do not wear loose-fitting
clothes or accessories.) Keep long hair bound.
vii
Ink
• Ink cartridges are labeled with precautions about
the ink. Thoroughly read them and make sure you
understand the contents.
• Before using ink and maintenance liquid, be sure
to read the Safety Data Sheet (SDS) and
instruction manual for ink.
supply/sds/
• Keep ink away from open flame. Also, be sure
that the room is well ventilated when using or
handling ink.
• Immediately wipe off any ink, maintenance liquid,
waste ink, or other liquid used with the machine
that comes into contact with your skin using a
cloth. Wash with soap and rinse with plenty of
water. Failure to observe these instructions may
result in skin inflammation. If your skin becomes
irritated or painful, seek medical attention
immediately.
• If ink, maintenance liquid, waste ink, or any other
liquid used with the machine comes into contact
with your eyes, rinse immediately with plenty of
clean water. Rinse for at least 15 minutes. If you
wear contact lenses and they can be easily
removed, remove after rinsing for at least 15
minutes with clean water. Rinse thoroughly,
including the undersides of your eyelids. Failure to
observe these instructions may result in blindness
or impaired vision. If your eyes become irritated or
painful, seek medical attention immediately.
• If ink, maintenance liquid, waste ink, or any other
liquid used with the machine enters your mouth or
is swallowed, gargle with water immediately. Do
not induce vomiting. Seek medical attention
promptly. Inducing vomiting may cause liquid to
enter the airway.
• If a large amount of vapor is inhaled, move to a
well-ventilated area, keep warm, and rest in a
posture that allows easy breathing. If the condition
does not improve, seek medical attention
promptly.
• Then contact the emergency number written on
the SDS.
Osaka 072-727-2499: Available 24 hours a
day
Tsukuba 029-852-9999: Available from 9:00
a.m. to 9:00 p.m.
Media
• At least two people must work together to load roll
media. Working alone may cause back injury from
the weight of rolls.
• When replacing media, be careful not to pinch
your fingers or injure yourself.
• The machine is equipped with an internal media
cutter. When replacing or loading media or
clearing media jams, do not touch areas other
than those specified in this manual. Failure to
observe these instructions may result in injury.
Cutter
• Do not touch the cutter blade, which is very sharp.
• Store the cutter blade out of the reach of children.
Dispose of used cutter blades according to local
regulations.
Heater
https://mimaki.com/