MIMAKI TxF150-75 Operation Manual page 77

With the screen in local mode, select
1
[MENU] > [MAINTENANCE], and then press
the [ENTER] key.
• The Maintenance menu is displayed.
Select [STATION MAINT.] > [CARRIAGE
2
OUT] > [STATION MAINT.], and then press
the [ENTER] key.
• The carriage moves over the platen.
• The carriage can be moved by hand. Move the
carriage slowly to a position allowing easy
replacement.
Replace the cutter.
3
(1) Unscrew the cutter screw.
(2) Remove the cutter.
(3) Mount a new cutter.
(4) Tighten the screw to clamp the cutter.
Screw
Press the [ENTER] key.
4
Carriage
Cutter unit
Chapter 4 Maintenance
4-19
1
2
2
4
5
6