MIMAKI TxF150-75 Operation Manual page 46

Chapter 3 Settings
Function name
EVENT MAIL TRANSMIT
TEST
(
SELECT
EVENT
SELECT
(
MAIL
ADDRESS
(
MESSAGE
SUBJECT
(
EVENT MAIL SERVER
SETUP
(
TRANSMIT
TEST
(
Auto Remote
RESET ( P.3-15)
*1. Available when both DHCP and AutoIP are set to OFF.
*2. Available only when Authentication is not OFF.
*3. Available only when Authentication is POP before SMTP.
3-8
Setting value
ON / OFF
P.3-12)
PRINT ON / OFF
START
PRINT END ON / OFF
P.3-12)
ERROR ON / OFF
EVENT
WARNING ON / OFF
EVENT
OTHER ON / OFF
EVENT
Sets the recipient email
address for event mail.
P.3-12)
Sets the text for the subject of
event mail.
P.3-12)
SMTP ADDRESS
SMTP PORT No.
P.3-12)
SENDER MAIL ADDRESS
Authentication OFF
POP before
SMTP
SMTP
Authentication
*2
USER NAME
*2
PASS WORD
*3
POP3 ADDRESS
*3
APOP
Sends a test email.
P.3-13)
ON / OFF
Default Setting
OFF Sets whether to send email when a
specified event occurs.
OFF Sets whether to send email when
printing starts.
OFF Sets whether to send email when
printing ends.
OFF Sets whether to send email when
errors occur.
OFF Sets whether to send email when
warnings occur.
OFF Sets whether to send email when
events other than the above occur.
Alphanumeric characters and symbols (up to 96
characters)
Alphanumeric characters and symbols (up to 8
characters)
Sets the SMTP server.
Sets the SMTP port number.
Sets the sender email address.
Sets the method of SMTP server authentication.
Sets the user name for authentication.
Sets the password for authentication.
Sets the POP server address.
Sets APOP on or off.
Sets whether to automatically switch to REMOTE mode
and start printing if data is received locally.
Restores the default values of all setting items.
Details