Troubleshooting; Power Does Not Turn On; Printing Is Not Possible; Media Jams Or Is Dirty - MIMAKI TxF150-75 Operation Manual

Chapter 5 Troubleshooting

Troubleshooting

Double-check the following points if you suspect mechanical failure. If the corrective action does not resolve the problem,
contact your dealer, or our sales office or call center.

Power does not turn on

This is usually due to incorrect connection of the power cable for the machine or computer. Confirm that the equipment is
connected correctly.
Is the power cable connected to the machine
and a power outlet?
Is the main power supply turned on?
Is the power switch on the front of the
machine set to ON?

Printing is not possible

This occurs when data is not transmitted to the machine correctly. It may also occur when printing functions are not
working correctly or media is not loaded correctly.
Is the correct interface cable used?
Is the interface cable connected correctly?
Is a message displayed indicating that ink
has run out?

Media jams or is dirty

Media jamming or becoming dirty may be due to using unsuitable media or loading it incorrectly.
Is recommended media used?
Are you sure the media is not curled, or that
the edges are not folded?
Is the media hanging down along the platen?

Heater temperature does not rise to the set level

Check basic machine operations.
5-2
Yes
Yes
Securely connect the power cable.
No
Turn on the main power supply (
No
Turn on the power switch on the front of the machine
No
( P.2-3).
Use the cable designed for the machine.
No
Securely connect the interface cable.
No
Replace with new ink cartridges.
Yes
Use recommended media.
No
Do not use curled media or media with folded edges.
No
Reload the media.
No
P.2-3).
P.2-4