Introduction; Attention; Instructions Of Safety - Teltonika FMB001 User Manual

1 INTRODUCTION

1.1

Attention

1.2

Instructions of safety

This chapter contains information on how to operate FMB001 safely. By following these
requirements and recommendations, you will avoid dangerous situations. You must read these
instructions carefully and follow them strictly before operating the device!
The device uses a 10 V...30 V DC power supply. The nominal voltage is 12 V DC. The
allowed range of voltage is 10 V...30 V DC.
To avoid mechanical damage, it is advised to transport the FMB001 device in an impact-
proof package.
Before dismounting the device from the vehicle, ignition must be off.
Do not disassemble the device. If the device is
damaged, before unplugging the power supply, do not
touch the device.
All wireless data transferring devices produce
interference that may affect other devices which are
placed nearby.
Please consult representatives of your vehicle model
regarding OBD II location on your vehicle. In case you
are not sure of proper connection, please consult
qualified personnel.
The programming must be performed using a second
class PC (with autonomic power supply).
The device is susceptible to water and humidity.
Any installation and/or handling during a lightning
storm are prohibited.
FMB001 has USB interface;
Teltonika is not responsible for any harm caused by
using wrong cables for PC <-> FMB001 connection.
Warning! Do not use FMB001 device if it distracts driver
or causes inconvenience due to OBD II placement.
Device must not interfere with driver.
7