Table of Contents
Advertisement
7.2.2 Example #2
Configuration of Profile2 to switch to Profile1 on DIN1 value change from 1 to 0:
8
DATA ACQUISITION
Data can be acquired using GPS or I/O elements. GPS data is for basic vehicle tracking, data
acquisition by I/O elements gives more specific information.
8.1 GPS data acquisition
There are four ways of GPS data acquisition which are configured in Features > sMode
menu (Figure 42).
Device checks angle, distance, time and speed differences with last saved record. If
differences are greater than configured a record is generated. Checking sequence: first angle is
checked then distance then time differences and last – speed differences.
Figure 41 Switch to profile on event (2)
72
Advertisement
Table of Contents
