Pc Connection (Windows); How To Install Usb Drivers (Windows) - Teltonika FMC640 First Start-Up Quick Start Manual

PIN
PIN NAME
NUMBER
1 GND (-)
2 CAN1L
3 1 WIRE
POWER
4 DIN 4
5 DIN 2
6 CAN2L
7 AIN2
8 DOUT3
9 DOUT2
10 AIN3
11 VCC (+)
12 CAN1H
13 1 WIRE
DATA
14 DIN 3
15 DIN 1
16 CAN2H
17 AIN1
18 DOUT4/AIN4 Digital output. Open collector output OR
19 DOUT1
20 K-LINE

PC Connection (Windows)

Power-up FMC640 with DC voltage 10-30 V power supply using supplied power cable.
1.
LED's should start blinking, see
2. Connect device to computer using Mini-USB cable connection and install USB drivers, see
"How to install USB drivers
3. You are now ready to use the device on your computer.

How to install USB drivers (Windows)

Please download COM port drivers from Teltonika here.
1.
2. Extract and run TeltonikaCOMDriver.exe.
3. Click Next in driver installation window.
DESCRIPTION
Ground
SAE J1939 CAN interface Low channel 1
Power supply pin for Dallas 1-Wire®
devices
Digital input, channel 4
Digital input, channel 2
SAE J1939 CAN interface Low channel 2
Analog input, channel 2. Input range:
0-30V/0-10V DC
Digital output. Open collector output
Digital output. Open collector output
Analog input, channel 3. Input range:
0-30V/0-10V DC
Power supply (+12-24 V DC)
SAE J1939 CAN interface High channel 1
Data channel for Dallas 1-Wire® devices
Digital input, channel 3
Digital input, channel 1. DEDICATED
FOR IGNITION INPUT
SAE J1939 CAN interface High channel 2
Analog input, channel 1. Input range:
0-30V/0-10V DC
Analog input, channel 4. Input range:
0-30V/0-10V DC
Digital output. Open collector output
K-LINE interface for online Tachograph
Vehicle Data transfer
"FMC640 LED
(Windows)"
status".