Manual Geofence - Teltonika FMB1YX User Manual

Enter Event – Event generation on Geofence
entrance.
Exit Event – Event generation on Geofence exit.
On Both - Event generation on Geofence entrance
Or exit
Eventual Records – Enable or Disable Eventual
Records functionality.
Note that AutoGeofencing does not require
entering coordinates, instead it requires GPS visibility. If
vehicle stopped and activation timeout has passed, an
AutoGeofence will be created around vehicle's last
position with set Radius value.

5.14 Manual Geofence

FMB1YX has
Geofence zones and it can generate an
event when defined Geofence zone border
is crossed.
Frame border – frame border is an
additional border around Geofence zone. It
is additional area around defined zone
used to prevent false event recording
when object stops on the border of the
area and because of GNSS errors some
records are made inside area and some –
outside. Event is generated only when both
borders are crossed. See figure 35 for
details: blue track is considered to have
entered the area while red track is not.
Shape – can be rectangle or circle. User can choose what geozone shape will be.
Priority – priority of Geofence event: low, high or panic. These levels define priority of
event information sending to server. See I/O element description for more details about
priorities in I/O settings chapter.
1
FMB125 don't have Digital Input 2 and Didital Input 3 selection
50 configurable
Figure 34 Auto Geofence configuration
parameters for FMB120 and FMB122
Figure 35 Geofence border
1
58