Teltonika FMB1YX User Manual page 65

Figure 43 1- Bluetooth settings; 2 - Enable Bluetooth; 3 - Bluetooth local name; 4 - Bluetooth
security mode; 5 - Hands Free connection mode; 6 - External Bluetooth device name; 7 - Authorized
 When device configuration is loaded press „Bluetooth" settings (Figure 43 1
position).
 Turn on BT Radio by pressing „Enable (visible)" (Figure 43 2 position). "Local name"
(Figure 43 3 position) automatically will be "FMB1YX_last 7 imei digits", you can
leave it or type your own name.
 Set Security Mode (Figure 43 4 position) to "PIN only" or "None" (you could select
"PIN + MAC list" or "MAC list only" security mode but in this case you need to type
external device MAC address in "Authorized Devices MAC List" (Figure 43 7
position).
 Set connection mode to "Hands Free" (Figure 43 5 position).
 Set „External Name" (Figure 43 6 position) as your Hands Free device name for
proper device identification and connection to it. In this example Hands Free
headset name is „DMH10" but at least 2 characters are needed to recognize it and
connect to it. For better and faster adapter identification in network you could
Devices MAC List;
65