Teltonika FMB1YX User Manual page 84

6.5 Garmin protocols
The following is a list of protocols supported and the corresponding feature/benefit.
FMB125 can fully support Fleet Management Interface (FMI) versions up to 2.1. Other or higher
versions may be supported, but Teltonika is not responsible for the changes made by Garmin,
which may affect the work of FMB125 and Garmin products. For more information about Garmin
products and FMI versions, please go to
http://www8.garmin.com/solutions/pnd/supportedproducts.jsp. Notice that some Garmin
products use different connection cables than others.
6.5.1 Standard protocols
Text Message Protocol:
• Allows text messages sent to device to be displayed in "inbox" on unit.
• Garmin can provide confirmation that message was read.
• Garmin can also provide a yes/no box below the text of the message to enable a simple
quick response.
• Messages can be up to 199 characters in length.
• Messages can also be generated from device and sent to dispatch/office.
• Messages received will be notified to driver through a pop-up alert on Garmin screen.
• Garmin provides a "virtual keyboard" on device through a touch-screen format for all text
communication.
Stop (Destination) Protocol:
• Garmin can display a list of Stops/Jobs reported to the device in a separate icon called
"My Stops".
• Driver has ability to navigate directly to Stop from list.
• Garmin can provide status on current Stop in progress.
• Is driver stopped at location?
• How far has Driver progressed through the list of Stops?
• Garmin can also provide confirmation that driver has received a particular Stop, read the
details, or deleted it from list.
• Can provide confirmation that a Stop has been completed.
Estimated Time of Arrival Protocol:
• Dispatcher/office can request the ETA of the current stop/job in progress.
• Garmin will notify the actual time of arrival as well as distance remaining to stop.
Auto-Arrival at Stop Protocol:
• This feature is used to tell the Garmin PND to automatically detect that it has arrived at a
Stop and then to prompt the driver if they would like to mark the
Stop as done and begin navigating to next Stop on the list.
• Auto-arrival can be determined by how long the unit is stopped close to the destination
(in the event driver has to park and walk) or by how close the unit needs to be to the destination
before the Auto-arrival feature is activated.
Data Deletion Protocol:
• Dispatch/office has the ability to wipe clean the data on the Garmin PND.
• Clean up messages in inbox/remove stops.
84