Pinout Table 1 FMB122 2x6 socket pinout PIN NUMBER PIN NAME DESCRIPTION VCC (10-30) V DC (+) Power supply (+10-30 V DC). Analog input, channel 1. Input range: AIN 1 0-30 V DC. Analog input, channel 2. Input range: AIN 2 / DIN 3 0-30 V DC / Digital input, channel 3.
Set up your device How to insert SIM card and connect the battery 1. Gently remove FMB122 cover using plastic pry tool from both sides. 2. Insert SIM card as shown with PIN request disabled or read Wiki how to enter it later in Teltonka Configurator.
Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the setup. 1. Power-up FMB122 with DC voltage (10 – 30 V) power supply using supplied power cable. LED’s should start blinking, see Configuration (Windows) “LED indications”.
Page 8
Most important configurator section is GPRS – where all your server and GPRS settings can be configured and Data Acquisition – where data acquiring parameters can be configured. More details about FMB122 configuration using Configurator can be found in our Wiki. Figure 10 Configurator Status window FMB122 | Wiki...
• server every 120 seconds 2005 – Port • After successful SMS configuration, FMB122 device will 2006 – Data sending protocol • synchronize time and update records to configured server. (0 – TCP, 1 – UDP) Time intervals and default I/O elements can be changed by using Teltonika Configurator parameters.
Depending on the car model, this may happen in 5 to 30 minutes period. ▬ When the module is connected, measure the voltage again to make sure it did not decrease. ▬ It is recommended to connect to the main power cable in the fuse box. FMB122 | Wiki...
Device is not working or Device is in boot mode Technology 2G bands Quad-band 850 / 900 / 1800 / 1900 MHz GPRS Multi-Slot Class 12 (up to 240 Data transfer kbps), GPRS Mobile Station Class B Data support SMS (text/data) FMB122 | Wiki...
Page 12
LED indication 2 status LED lights LLS (Analog), LV-CAN200, ALL-CAN300, Fuel monitoring Dual SIM OBDII dongle, CAN-CONTROL Digital Input 1, Accelerometer, External Memory 128MB internal flash memory Ignition detection Power Voltage, Engine RPM (CAN Adapters, OBDII dongle) FMB122 | Wiki...
Input voltage (Recommended Operating Supply Supply voltage +4.5 +4.7 Conditions) voltage Output inner resistance Ω Input Voltage threshold (DIN1) Output current (U > 3.0 V) Input Voltage threshold (DIN2) Short circuit current (U = 0) Input Voltage threshold (DIN3) FMB122 | Wiki...
EN 62368-1 standard. according to the instructions. The device FMB122 is not designed as a navigational device for boats. Battery should not be disposed of with general Do not disassemble the device. If the device is household waste.
• • FMB122 E-Mark FMB122 RoHS • FMB122 Declaration of device operation temperature • This sign on the package means that it is necessary to read the User‘s Manual before your start using the device. Full User‘s Manual version can be found in our Wiki.
More information can be found at teltonika.lt/warranty-repair • Repaired • Replaced with a new product • Replaced with an equivalent repaired product fulfilling the same functionality • TELTONIKA can also repair products that are out of warranty at an agreed cost. FMB122 | Wiki...