Teltonika FMB1YX User Manual page 170

9.13 I/O parameters
I/O properties are additional data sources which are recorded along with usual GPS data.
9.13.1 I/O#1 property parameter priority Ignition (ID=50000)
Parameter defines I/O property type of priority: 0 is disabled, 1 – low, 2 – high, 3 - panic.
Minimum Maximum
value value
0 3
9.13.2 I/O#1 operand (ID=50001)
Parameter defines when event is sent: 0 – on range exit, 1 – on range entrance, 2 – both,
3 – monitoring, 4 – hysteresis, 5 – on changes, 6 – on delta change.
Minimum Maximum
value value
0 6
9.13.3 I/O#1 High level (ID=50002)
Parameter defines high value of triggered I/O property. This parameter is used to set
thresholds for I/O properties to generate events.
Minimum Maximum
value value
0 1
Default value Goes with (depends on)
I/O#1 operand (ID=50001)
I/O#1 High level (ID=50002)
I/O#1 Low level (ID=50003)
1 I/O#1 Event only (ID=50004)
I/O#1 averaging length (ID=50005)
I/O#1 send SMS (ID=7000)
I/O#1 SMS text (ID=8000)
Default value Goes with (depends on)
I/O#1 property parameter priority
I/O#1 High level (ID=50002)
I/O#1 Low level (ID=50003)
0
I/O#1 Event only (ID=50004)
I/O#1 averaging length (ID=50005)
I/O#1 send SMS (ID=7000)
I/O#1 SMS text (ID=8000)
Default value Goes with (depends on)
I/O#1 property parameter priority
I/O#1 operand (ID=50001)
I/O#1 Low level (ID=50003)
0
I/O#1 Event only (ID=50004)
I/O#1 averaging length (ID=50005)
I/O#1 send SMS (ID=7000)
parameters
parameters
Ignition (ID=50000)
parameters
Ignition (ID=50000)
I/O#1 SMS text (ID=8000)
Value
type
Uint8
Value
type
Uint8
Value
type
Uint8
170