Teltonika FMB1YX User Manual page 79

 TCP Binary – for routing any binary input data from external device to server.
RS485 Baudrate
5.19.10.7
Every RS485 mode support different baudrates, but each mode has its own default
baudrate value. Default baudrate values for each RS485 working mode are provided in table 14.
RS485 LLS Sensors
5.19.10.8
LLS addresses may be configured for 5 LLS sensors. If at least one LLS sensor is connected
to FMB125 when configuring device with configurator LLS sensor ID will be entered
automatically.
6 RS232 and RS485
6.1 RS485 Interface
RS485 supports only Half Duplex communication. It means that at the same time you can't
send/receive Data.
1
Only support FMB125 device
Figure 64 RS485 configurable parameters
Figure 65 RS485 five LLS Sensors address selection window.
1
79