Teltonika FMB1YX User Manual page 97

Command
sdformat
Table 16. SMS commands related to features
Command
fc_reset
towingreact
auto_calibrate
position_info
calibrate
odoset:#
odoget
Table 17. SMS commands related to Bluetooth
Command
btgetlist #
btscan
btvisible #
btrelease #
btunpair #
Table 18. SMS commands related to OBD
Command
obdinfo
faultcodes
cleardtc
getvin
Table 19. SMS commands related to LV-CAN200/ALL-CAN300
Command
lvcansetprog #
lvcansimpletacho #
Description
Format SD card.
Description
Resets fuel consumption parameters
Towing reactivation
Calibrate position if car accelerate straight to > 30
km/h for 5 sec.
Indicates what axis is set to the front of the car.
Zero out accelerometer axis (vehicle speed must be 0
km/h.)
Set total odometer value.
# - new odometer value in km
Display current odometer value
Description
Returns requested Bluetooth list.
# - 0,1 or 2 (0 – Discovered, 1 – Paired, 2 – Connected)
Starts Bluetooth scan.
Sets Bluetooth to visible with TMO.
# - visibility TMO (from 1 to 255 seconds).
Disconnects from current device and pauses auto
connect functionality for TMO
# - none or TMO (from 1 to 255 seconds).
Unpair Bluetooth device.
# - all, BT address (all – unpair all devices, BT address –
unpair only specified MAC address).
Description
If connected with Bluetooth OBD dongle displays all
available information from OBD.
If connected with Bluetooth OBD dongle display all
visible fault codes.
Clears all vehicle stored foult codes.
Get vechicle VIN code, if OBD dongle is connected.
Description
Set program number to LV-CAN200/ ALL-CAN300 that
is connected to FMB1YX.
# thre digits number that identity vehicle.
Add or remove simpletacho start byte.
Response
Yes
Response
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Response
Yes
Yes
Yes
Yes
Yes
Response
Yes
Yes
No
Yes
Response
Yes
No
97