Data Output; Auto Calibaration - Teltonika FMB1YX User Manual

Table 13. Green driving parameters description
Green driving
configuration
parameter name
Scenario settings
Max Acceleration Force
Max Braking Force
Max Cornering Force
Source
5.9.1.1
Green driving functionality generates events on three cases. If vehicles:
 Acceleration exceeds defined parameter value
 Deceleration (braking) exceeds defined value
 Cornering force exceeds defined value
Program continously monitors and process data from accelerometer/GPS than decides
whether harsh event is detected or not. If any of three cases are satisfied event is
generated. Record is saved and sent to server (FMB1YX must be configured properly).
Event value is multiplied by 10 before sending/saving record to get more precision
when displaying data*.
Digital output 1 or digital output 2 can be activated for a period of time to warn
driver. Output on-time should/can be configured separately for each feature case.
*Example. If acceleration harsh event of 3.55 m/s2 detected. Record with value 3.55*10 = 35.5
≈ 36 will be saved ant sent to server.
5.9.1.2
1. Vehicle stopped
2. Road is straight
3. Send SMS "auto_calibrate"
4. Accelerate to > 30 km/h for 5 sec.
5. FMB will send response when calibration is success.
Calibration is saved to Internal Flash, after restart should be the same
To check autocalibration status send: position_info
To zero out accelerometer axis SMS: "calibrate", can be used, vehicle speed must be 0
km/h.
Enable/Disable Green driving functionality.
Value which can be reached while accelerating without triggering harsh
acceleration event.
Value which can be reached while braking without triggering harsh
braking event.
Value which can be reached while cornering without triggering harsh
cornering event.
From what source (GPS or accelerometer) data will be collected.

Data output

Auto Calibaration

Description
50